Suttner ST-160 Foam Injector
SUTTNER ST-160 Single INJECTOR
Includes
1. 3/8" Plug (Inlet)
2. Chemical Pick Up Tube Barb (Inlet)
3. 3/8" Coupler (Outlet)
4. 10' Clear Pick Up Tube
5. Chem-X Flow Cap
6. 10 Dosing Nozzles & O-Rings
-
- Plug + Play
- Uses 4-5x Less Soap Than Traditional Style Injectors
- 9 Dosing Nozzles Included
- Durable Stainless Steel Construction
HOW TO INSTALL
1. Connect ST-160 injector after power washer and before your high psi hose. The ST-160 will be made ready with a stainless 3/8" quick connect plug on the inlet and a stainless 3/8" quick connect socket on the the outlet.
2. Place chemical pick up tube directly into soap.
3. Foam all of the things!
-
Injector will be set to run at 100:1 unless specified otherwise, this can be changed by simply changing metering tip inside injector barb.
-
If using a hot water machine, scale build up from your coil can plug injector or foam head. On start up always run with injector in rinse mode for about 30-60 seconds to flush out any build up.
-
If a jumper hose is needed to go from your power washer to ST-160 injector please see our selection of hoses in accessories.
-
Other downstream injectors must be removed from your machine.
-
Limited to 150' of power washer hose after the injector.
-
ST-160 injectors come standard with a 3/8" QC Plug on the inlet and a 3/8" QC Coupling on the outlet. QC orientation can be reversed upon request.
- -
*Other downstream injectors must be removed from your machine.
*Limited to 150' of power washer hose after the injector.
*ST-160 injectors come standard with a 3/8" QC Plug on the inlet and a 3/8" QC Coupling on the outlet. QC orientation can be reversed upon request.
SPECS
- Min/Max Flow Rate: 1-6gpm
- Min/Max PSI: 1000-4000psi
- Rated for 194 degree water
Original: $221.00
-70%$221.00
$66.30
Description
SUTTNER ST-160 Single INJECTOR
Includes
1. 3/8" Plug (Inlet)
2. Chemical Pick Up Tube Barb (Inlet)
3. 3/8" Coupler (Outlet)
4. 10' Clear Pick Up Tube
5. Chem-X Flow Cap
6. 10 Dosing Nozzles & O-Rings
-
- Plug + Play
- Uses 4-5x Less Soap Than Traditional Style Injectors
- 9 Dosing Nozzles Included
- Durable Stainless Steel Construction
HOW TO INSTALL
1. Connect ST-160 injector after power washer and before your high psi hose. The ST-160 will be made ready with a stainless 3/8" quick connect plug on the inlet and a stainless 3/8" quick connect socket on the the outlet.
2. Place chemical pick up tube directly into soap.
3. Foam all of the things!
-
Injector will be set to run at 100:1 unless specified otherwise, this can be changed by simply changing metering tip inside injector barb.
-
If using a hot water machine, scale build up from your coil can plug injector or foam head. On start up always run with injector in rinse mode for about 30-60 seconds to flush out any build up.
-
If a jumper hose is needed to go from your power washer to ST-160 injector please see our selection of hoses in accessories.
-
Other downstream injectors must be removed from your machine.
-
Limited to 150' of power washer hose after the injector.
-
ST-160 injectors come standard with a 3/8" QC Plug on the inlet and a 3/8" QC Coupling on the outlet. QC orientation can be reversed upon request.
- -
*Other downstream injectors must be removed from your machine.
*Limited to 150' of power washer hose after the injector.
*ST-160 injectors come standard with a 3/8" QC Plug on the inlet and a 3/8" QC Coupling on the outlet. QC orientation can be reversed upon request.
SPECS
- Min/Max Flow Rate: 1-6gpm
- Min/Max PSI: 1000-4000psi
- Rated for 194 degree water
